The LIMBUS 35 is the smallest tube filler in Subnil’s range with a capacity to produce about 12,000+ tubes per shift, 

Tubes have to be first manually transferred from the tube box, into the cassette on the machine. They are then loaded one by one into the holders on the turret. First the tubes are centered & oriented and then filled. They are then closed depending on the type of tube. In case of metal tubes, the tubes are flattened and crimped twice (or even thrice). In case of laminate / plastic tubes, they are first heated on the inside periphery and then sealed. Batch details are then coded on the crimp (or seal) with metal stereos and the tubes are ejected out either into a collection container or to a tube-transfer system to link to the downstream MERLIN 120XC cartoner from Vectacraft.

Technical Specifications

Features

The pump unit has a vertical dosing system, which aids in easy suction
Bottom-up filling coupled with shut-off nozzle ensures accurate & clean fill without air entrapment
Indexer is absolutely smooth.
Tool-less adjustments coupled with faster reproduction of settings (aided by position indicators and tri-clover fittings) make changeover quite effortless. 
Product level sensor, centralised lubrication and a host of safety features like detection of reverse tube, jammed tube, air pressure drop etc. are part of basic machine.       

Optional equipment

Saddle fold
Multi-colour filling
Designer seal in plastic tubes
Gas flushing before & after filling 

The SL 70 is a slow/medium speed tube packaging line producing about 23,000 tubes per shift. The LIMBUS 70 is a mid-range single-head tube filler which fills the product into the tube and then closes it depending on the type of tube. Metal tubes are crimped whereas plastic/laminate tubes are sealed.

Once closed, the tube is ejected out of the tube filler onto a tube transfer system which flaps the tube exactly into the pocket of the product conveyor of the MERLIN 120XC horizontal cartoner. Here, first a pre-folded leaflet is picked up by a rotary pick-up device and fed to the pincer on the leaflet chain. Then, a carton is picked up from the stack by a rotary pick-up device, pre-broken and then loaded into the carton chain. The tube is inserted into the carton and it is closed on both sides either by tuck-in or gluing.

The cartons then travel from the outlet of the cartoner to the in-feed conveyor of the OSPREY 18V bundler where they are first collated in a desired matrix. The required length of BOPP film is then brought down by grippers; the bunch is wrapped with the same and pushed to the sealing station. Here, first the main overlapped film is sealed and subsequently the films on the pack ends are sealed to create a sturdy multipack.

The multipacks then travel to one of the KESTREL series casepackers where they are collated in a required configuration and then pushed into a case, which has been opened and kept ready earlier. The case is then taped or glue-sealed.

Hence, the first machine takes in the empty tubes and the product to be filled and the last machine produces a packed case, ready to be shipped out of the customer’s factory.

The SL 100 is a medium speed tube packaging line producing about 33,000 tubes per shift. The LIMBUS 100 is the fastest single-head tube filler in Subnil’s range. It fills product into the tube and then closes it depending on the type of tube. Metal tubes are crimped whereas plastic/laminate tubes are sealed.

Once closed, the tube is ejected out of the tube filler onto a tube transfer system which flaps the tube exactly into the pocket of the product conveyor of the MERLIN 120XC horizontal cartoner. Here, first a pre-folded leaflet is picked up by a rotary pick-up device and fed to the pincer on the leaflet chain. Then, a carton is picked up from the stack by a rotary pick-up device, pre-broken and then loaded into the carton chain. The tube is inserted into the carton and it is closed on both sides either by tuck-in or gluing.

The cartons then travel from the outlet of the cartoner to the in-feed conveyor of the OSPREY 18V bundler where they are first collated in a desired matrix. The required length of BOPP film is then brought down by grippers; the bunch is wrapped with the same and pushed to the sealing station. Here, first the main overlapped film is sealed and subsequently the films on the pack ends are sealed to create a sturdy multipack.

The multipacks then travel to one of the KESTREL series casepackers where they are collated in a required configuration and then pushed into a case, which has been opened and kept ready earlier. The case is then taped or glue-sealed.

Hence, the first machine takes in the empty tubes and the product to be filled and the last machine produces a packed case, ready to be shipped out of the customer’s factory.

The SL 300 is the fastest tube packaging line in Subnil’s stable. With a capacity to produce about a whopping 100,000 tubes per shift, the line starts with the CONDOR 300 linear-model tube filler. It’s a 4-head tube filler which fills product into the tube and then closes it depending on the type of tube. Metal tubes are crimped whereas plastic/laminate tubes are sealed.

Once closed, the tube is ejected out of the tube filler onto a 4-lane tube transfer system which flaps the tube exactly into the pocket of the product conveyor of the MERLIN 300XC horizontal cartoner. Here, first a pre-folded leaflet is picked up by a rotary pick-up device and fed to the pincer on the leaflet chain. Then, a carton is picked up from the stack by a 3-arm rotary pick-up device, pre-broken and then loaded into the carton chain. The tube is inserted into the carton and it is closed on both sides either by tuck-in or gluing.

The cartons then travel from the outlet of the cartoner to the in-feed conveyor of either the OSPREY 18V or 30V bundler (depending on the matrix), where they are first collated as desired. The required length of BOPP film is then brought down by grippers; the bunch is wrapped with the same and pushed to the sealing station. Here, first the main overlapped film is sealed and subsequently the films on the pack ends are sealed to create a sturdy multipack.

The multipacks then travel to one of the KESTREL series casepackers where they are collated in a required configuration and then pushed into a case, which has been opened and kept ready earlier. The case is then taped or glue-sealed.

Hence, the first machine takes in the empty tubes and the product to be filled and the last machine produces a packed case, ready to be shipped out of the customer’s factory.

The CONDOR 300 is a high-speed tube filler with a capacity to produce about 100,000 tubes per shift. This is the fastest tube filler in Subnil’s range. 

The tubes have to be first manually transferred from the tube box to the cassette provided on the machine. In turn the cassette transfers them, through multiple chutes, to a servo-driven pocketed conveyor. From the conveyor, multiple tubes are picked up by a rotary pick-up device, driven by servo, and loaded into the tube holders. First the tubes are centered & oriented and then filled. They are then closed depending on the type of tube. In case of metal tubes, the tubes are flattened and crimped twice (or even thrice). In case of laminate / plastic tubes, they are first heated on the inside periphery and then sealed. Batch details are then coded on the crimp (or seal) with metal stereos and the tubes are ejected out either into a collection container or to a tube-transfer system to link to the downstream MERLIN 300XCcartoner from Vectacraft.

Technical Specifications

Features

The pump unit has a vertical dosing system, which aids in easy suction
Bottom-up filling coupled with shut-off nozzle ensures accurate & clean fill without air entrapment
Indexer is absolutely smooth.
Tool-less adjustments coupled with faster reproduction of settings (aided by position indicators and tri-clover fittings) make changeover quite effortless.
Product level sensor, centralised lubrication and a host of safety features like detection of reverse tube, jammed tube, air pressure drop etc. are part of basic machine.

Optional equipment

Saddle fold
Multi-colour filling
Designer seal in plastic tubes
Gas flushing before & after filling
Servo motor options in various stations

The LIMBUS 150 is a twin-head medium/fast speed tube filler able to produce about 45,000+ tubes per shift

Tubes have to be first manually transferred from the tube box, into the two cassettes on the machine. They are then loaded one by one into the holders on the turret. First the tubes are centered & oriented and then filled. They are then closed depending on the type of tube. In case of metal tubes, the tubes are flattened and crimped twice (or even thrice). In case of laminate / plastic tubes, they are first heated on the inside periphery and then sealed. Batch details are then coded on the crimp (or seal) with metal stereos and the tubes are ejected out either into a collection container or to a tube-transfer system to link to the downstream MERLIN 180XC cartoner from Vectacraft.

Technical Specifications

Features

The pump unit has a vertical dosing system, which aids in easy suction
Bottom-up filling coupled with shut-off nozzle ensures accurate & clean fill without air entrapment
Indexer is absolutely smooth.
Tool-less adjustments coupled with faster reproduction of settings (aided by position indicators and tri-clover fittings) make changeover quite effortless.
Product level sensor, centralised lubrication and a host of safety features like detection of reverse tube, jammed tube, air pressure drop etc. are part of basic machine.

Optional equipment 

Saddle fold
Multi-colour filling
Designer seal in plastic tubes
Gas flushing before & after filling
Servo motor options in various stations